How to assemble our ModMyPi Mini Camera Mount!
Bill of Materials
1. The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly (this is *very* therapeutic), simply peel it off
2. Let's get the fiddly bit out of the way! Secure the four M2 screws to the camera PCB using the provided nuts. These nuts will act as stand-offs, protecting the components on the PCB from getting damaged.
3. Secure the Raspberry Pi camera to the mounting plate with the remaining nuts.
4. Viola! Case complete!
NOTE: Acrylic is a hard and stiff plastic which is sensitive to stress concentrations and shares a certain level of fragility with glass. Acrylic can scratch easily and should be cleaned with a mild solution of dish detergent and warm water (only once you've removed the Raspberry Pi/Camera!). Never use cleaners unsuitable for acrylic. Never use a dry, abrasive cloth.
